Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots |
During the development of the 550 most of the time and resources were spent on developing the Type 547 engine. The small four cylinder boxer with four tiny camshafts had performed really well, but Porsche engineers felt there was more left. A major development was moving the drive for the distributor from the intake camshafts to the crankshaft. Other improvements were fitting two Weber Carburetors and raising the compression. The Type 547/2 as the engine was known produced 125 bhp early in the year and towards the end of the season a reliable 135 bhp could be attained. Torque was also increased considerably from 120 Nm to 145 Nm. The engine was mated to a five speed gearbox and mounted midships in the spaceframe chassis.
This is the other model racer that came in a "PARTS BOX". All the cars are 60's vintage. Still unpainted and virtually untested, the 550A was first raced during the 1956 Mille Miglia, understandably with little success. The German debut came during the 1000km race at the Nürburgring where two 550As were entered. They finished fourth and sixth overall, taking a one-two class win in the process. For the 24 Hours of Le Mans, two new cars were constructed, fitted with a fastback roof similar to the one fitted on the first 550s. One car retired, while the other finished fifth overall and first in class. After a successful debut season, Porsche commenced limited series production of the 550A for customers. In 1957 the factory continued development of the Type 547 engine and several versions with different displacements were constructed for use in hillclimbs. The largest was the Type 547/5 with a displaced of nearly 1.7 litre. |
Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots |
For the 1957 season all eyes were back on the chassis and body once more. Following the lines of the experimental low-drag 'Mickey Mouse' spyder a new body design was penned. It was both lower and smoother than that of its predecessors. Under the aluminium body there were several more detail changes. The front trailing arms were relocated to improve the suspension dynamics; the camber of the front wheels would now increase as the wheels moved upwards. The changes required the steering box to be mounted in the middle of the car. The much lower front frame resembled the letter K if looked at from the front and the new version was commonly referred to as the 'RSK'. The internal name for the new car was the Type 718.
The works team first entered the Type 718 RSK at the 1957 Nürburgring 1000 km race, but it only practiced. The car's first race was Le Mans, where it was forced to retire after 10 hours as the result of an accident. The car had not impressed at either events, so much time was spent improving the RSK for the 1958 season. First to go was the unusual front suspension and replaced by the original configuration. There were more dramatic changes at the rear, where for the first time in Porsche history, the traditional swing-axle design was discarded. A Watt-linkage of two radius rods replaced the single trailing arm, better controlling the angle of the wheel during travel. The 1.5 litre engine was modified and fitted with larger Carburetors, resulting in the 142 bhp Type 547/3. The larger 1.6 and 1.7 engines were also fitted to 718 RSK chassis for various races.
Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots |
The Porsche 718 RSK did not only make its mark on sports car racing, it also proved to be a commendable Formula 2 racer. Thanks to the central location of the steering box, the RSK could easily be converted to single seater specification. Porsche already planned to race an RSK at Reims in 1957, but the Le Mans crash prevented that. At the 1957 Nürburgring Grand Prix, a modified 550A set the fastest F2 practice time and won the F2 race. In 1958 the RSK made its F2 debut with a victory at Reims and Avus as well as a second place finish at the Nürburgring against purpose built single seaters. In 1959 Porsche built four special RSKs for customers that could be easily converted to single seater specification. Encouraged by the success, Porsche built a dedicated single seater for the 1960 season. This Type 787 was still clearly related to the 718 and scored numerous wins.
Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots |
Despite being based on a car that debuted in 1956, the RS 60 Spyder again proved to be a giant slayer. The international racing debut came at the 1960 Sebring 12 Hours. Reminiscant of the 550A's early performance, the RS 60 took an amazing one-two victory in the 12 Hour event. Next up was a win at the Targa Florio and Porsche looked well on their way to winning the World Championship against the three-litre engined Ferraris. A second and fourth at the 'Ring must have felt like a disappointment. Le Mans certainly was disappointing with the highest placed RS 60 finished twelfth and second in class. Porsche and Ferrari had both scored 22 points, but Ferrari was awarded the title on the grounds that they had finished third more often than Porsche. In 1961, the Porsches had to make do with class wins as the Works concentrated on the Grand Prix program. Enzo's Garage at Amazon.com http://www.amazon.com/shops/slots Although in heavily modified form, the first Porsche spaceframe chassis was raced successful for almost ten years, taking a Targa Florio win as late as 1963. These nimble racing cars lifted Porsche up from a class victory contender to a serious rival to racing greats. They were certainly instrumental in the company's long path to the much desired Le Mans win and all cars designed in the 1960s incorporated the lessons learned in the many years the 550A, RSK and RS Spyders were raced. |
GoTo http://www.amazon.com/shops/slots for Enzo's storefront at Amazon.com
ReplyDelete